Slow Blow Micro Fuse T3 15A 300V is 300V rated fuses can reduced PCB space requirements and designed in accordance to IEC 60127-3 , IEC60127-1 , GB9364.1-1997, GB9364.3-1997.
8x4x7mm Slow Blow Tape Ammo Pack High Voltage Subminiature Micro Fuse T3.15A 300V
Description of Slow Blow Micro Fuse T3 15A 300V
8x4x7mm Slow Blow Micro fuse, designed in accordance to IEC 60127-3. These internationally approved, vibration-resistant fuses feature shock-safe casing and are rated at 300V max voltage. The NTS series is offered in direct solderable or plug-in versions, containing models rated from 50mA to 20A. The aolittel thermoplastic line of fuses is suited for electronic ballasts, as the AC line fuse in LED lighting applications, as well as designs with small PCB space requirements.
Features of Slow Blow Micro Fuse T3 15A 300V
Vibration-resistant, shock-safe casing
Internationally approved - meets IEC 60127-3 standards
300V max voltage rating
20mA to 20A rated current range
Low internal resistance
Halogen and lead-free, RoHS-compliant
Directly solderable on printed circuit boards
High breaking capacity
Material of Slow Blow Micro Fuse T3 15A 300V
Copper, tin-plated round pins
Brown thermoplastic polyamide PA 6.6, UL 94 V-0 base/cap
Application of Slow Blow Micro Fuse T3 15A 300V
Electronic ballasts
AC line fuse in LED lighting applications
Designs with reduced PCB space requirements
Specification of Slow Blow Micro Fuse T3 15A 300V
a.Ordering Information of the 8x4x7mm Slow Blow Micro Fuse
P/N |
Ampere Rating |
Voltage Rating |
Max Voltage Drop (mv) |
I2TMelting Integral(A2.S) |
NTS0050A |
50mA |
300V |
555 |
0.02 |
NTS0100A |
100mA |
300V |
355 |
0.11 |
NTS0125A |
125mA |
300V |
323 |
0.12 |
NTS0160A |
160mA |
300V |
296 |
0.17 |
NTS0200A |
200mA |
300V |
272 |
0.21 |
NTS0250A |
250mA |
300V |
251 |
0.41 |
NTS0315A |
315mA |
300V |
237 |
0.63 |
NTS0400A |
400mA |
300V |
211 |
1.22 |
NTS0500A |
500mA |
300V |
202 |
2.34 |
NTS0630A |
630mA |
300V |
191 |
2.88 |
NTS0800A |
800mA |
300V |
172 |
3.92 |
NTS1100A |
1A |
300V |
200 |
5.77 |
NTS1125A |
1.25A |
300V |
200 |
8.34 |
NTS1160A |
1.6A |
300V |
190 |
13.60 |
NTS1200A |
2A |
300V |
170 |
25.90 |
NTS1250A |
2.5A |
300V |
170 |
42 |
NTS1300A |
3A |
300V |
165 |
45 |
NTS1315A |
3.15A |
300V |
150 |
64 |
NTS1400A |
4A |
300V |
130 |
92 |
NTS1500A |
5A |
300V |
130 |
140 |
NTS1630A |
6.3A |
300V |
130 |
208 |
NTS1800A |
8A |
300V |
100 |
265 |
NTS2100A |
10A |
300V |
100 |
295 |
NTS2150A |
15A |
300V |
185 |
295 |
b.Size of Slow Blow Micro Fuse T3 15A 300V
c. Breaking Capacity: 35A or 10In whichever is greater. After the test, the insulation resistance value is greater than 0.1ΜΩ
Rising Temperature Test:Testing with 1.5In for 15 minutes, then increase 0.1Inevery 15 minutes.When fuseopened,any part of measured temperature rise shall not exceed 135℃,andthe ambient temperature of 25 ± 5℃.
d.Pre-Arcing Time / Current Characteristic(limits)of Slow Blow Micro Fuse T3 15A 300V
Rating |
Blowing Time |
210% |
2 min Max |
275% |
400 ms~10 s |
1000% |
20 ms~150 ms |
e.Environmental Characteristic of Slow Blow Micro Fuse T3 15A 300V
Operating Temperature:-55℃~+125℃。
Stock Condition:Humidity:Relative humidity ≤ 75% store 3 years average.
When choosing the fuse's specification, if the operating environmental temperature beyond the scope from 20~30℃, engineer should consider the environmental temperature's affection to fuses. Please refer: Temperature Rerating Curve:
Package of Slow Blow Micro Fuse T3 15A 300V
A:Taping package 1000 pcs per box
B:Bulk1000 pcs / poly bag
5 poly bags / box, altogether5000 pcs
Advantages of Slow Blow Micro Fuse T3 15A 300V
Fuse is the cheapest protection device in all over the electrical circuit against the short circuit overloading of the circuit. Fuse is used in low and moderate voltage applications where the frequency operations not expected or where the use of a circuit breaker is uneconomical. It is a basic metal wire or thin strip which has the property of a low melting point which is inserted into the electrical circuit as a protective device. The fuse will protect the machine or electrical equipment against excessive currents. Here this post gives information about the advantages and disadvantages of fuse to better understand how to fuse is used in an electrical circuit.
Fuses are the cheapest form of protection.
The fuse element change very easily.
The fuse needs zero maintenance.
It affords the current limiting effect under short circuit conditions.
Its operation is completely automatic and requires less time as compared to circuit breakers and no complexity is envolved
Most of the fuses are self-protecting and also they extinguishing the arc.
When we use the small size of the fuse element impose a current limiting effect under short circuit conditions.
Its inverse time-current characteristics enable its use for overload protection.
Fuse has the ability to interrupt enormous short circuits without producing noise, flame or smoke.
Easy to removable for replacement without any damage to coming into contact with a live part.
The operation time of fuse can be much smaller than the operation of the circuit breaker. It is the primary protection device, against the short circuits.