Pallet Thermal Fuse 10A

Pallet Thermal Fuse 10A 250 Volt For Electric Blower Heater Dryer

Description Of Pallet Thermal Fuse 10A

The thermal fuse (cutoff) offers the simplest kind and tiny possibility to protect small electrical devices against thermal overloading. If the customer appliance get to hot the thermal fuse will interrupt the current circuit to keeping its function properly and safely. Thermal fuse is an one shot device, after operating function have to be replaced.

Typical application Of Pallet Thermal Fuse 10A

The kind of using is very varied for example: wide range of home appliances, electric motor, transformer, electrical ballast, etc. Approval：VDE and CCC.

Diagrammatic section Of Pallet Thermal Fuse 10A

Operating method Of Pallet Thermal Fuse 10A

Cautions Keep space of more than 3 mm from the body of the cutoff when bending a lead wire. Do not heat more than TF -24°C when soldering or welding. Be aware that the electric current flows an the surface of cutoff.

Size Of Pallet Thermal Fuse 10A(mm)

Certifications Of Pallet Thermal Fuse 10A

How to Replace a Dryer Thermal Fuse

The first sign that your dryer fuse is not working is that your clothes are thoroughly tumbled, but cold and wet. Check your owner's manual for instructions on whether you can just remove the back panel of the dryer where the thermal fuse is usually located, or if you also have to remove the top. If you don't have your owner's manual, it should be possible to find one online.

Once you have the manual and have located the thermal fuse, you will be able to tell whether it will reset itself or will have to be replaced. Thermal fuses generally cost less than $10 U.S. and can be found in appliance stores, hardware and home improvement stores and online. Once you have replaced the thermal fuse, clean out the dryer vent, exhaust hose and lint trap so that problem does not reoccur.

Q1. Can I have a sample order for led light?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A: Sample needs 2 days, mass production time needs 3-4 days for order quantity more than

Q3. Do you have any MOQ limit for thermal fuse order?

A: Low MOQ, 5pcs for samples checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for thermal fuse?

A: Firstly let us know your requirements or application.

Secondly We quote according to your requirements or our suggestions.

Thirdly customer confirms the samples and places deposit for formal order.

Fourthly We arrange the production.

Q6. Is it OK to print my logo on the product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.

Secondly, during the guarantee period, we will send new products with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.