200mA 600OHM Positive Temperature Coefficient Resistor MZ4 PTC Thermal Protection Manufacturers and Suppliers - China Factory

Product Description

200mA 600OHM Positive Temperature Coefficient Resistor MZ4 PTC Thermal Protection

Phenolic Resin Overcurrent Protection PTC Thermistor MZ4 600~800OHM For Electric Meter

I Description Of The Phenolic Resin Overcurrent Protection PTC Thermistor

MZ4 series PTC thermistors are used in various types of fluorescent lamps, electronic ballasts and electronic energy-saving lamps as preheating-starting components. Preheating of the electrodes lengthens the life of the lamps and the number of switching cycles significantly. Ampfort has been working at PTCR'S research, development and manufacturing for ten years. With rich experience, our company offers PTC thermistors for time delay and switching with high quality and reasonable price. Many lighting producers, including some famous international companies are our customers.

II Features Of The Phenolic Resin Overcurrent Protection PTC Thermistor

1. PTC thermistor for time delay start of ballast & lamp could extend the service life of the fluorescent tube by more than 10-time
2. PTC thermistor applied in various types of electronic energy-saving lamp and fluorescent electronic ballasts
3. Switching current can pass over 100,000 times: the resistance will not float
4. The withstanding voltage can reach to over 800-1,000V AC
5. High reliability, good performance of safety and stability

6. Application:Energy-saving lamp, fluorescent electronic ballasts,and digital multi-meters

III Size Of The Phenolic Resin Overcurrent Protection PTC Thermistor(Unit:mm)

Number	Name	Technical Requirements	Leads
D	Diameter	4.5max	□ Straight □ Axis Formed ■ In-Forming
T	Thickness	5.0max
L	Lead Length	Min20
W	Distance between fuses	5.0±0.5
d	Diameter of lead	0.5±0.05

IV Coating Details Of The Phenolic Resin Overcurrent Protection PTC Thermistor

Coating

Material

Color

□ No coating

■ Coating

■ PF resin

□ Silicon

■ Yellow

■ Green

V Electrical Performances Of The Phenolic Resin Overcurrent Protection PTC Thermistor

Number	Items	Technical Requirements	Test Conditions
3-1	Resistant for Zero Rated Power	600-800Ω	Atmosphere Temperature:25±2℃ Accuracy of the Test:±0.5%
3-2	Over Voltage Withstanding	≥800V ΔR/Rn≤20% No visual damage	Starting Current:≥200mA, Starting Voltage:220VAC,hold on for 7s,and then change to high voltage800VAC,for 6s.the is shown as follows: Stay under the conditions of regular temperature and humidity for 4-5 hours, and then check the Rn again.
3-3	Over Current withstanding	≥200mA ΔR/Rn≤20% No visual damage	Starting Current:≥200mA,Voltage 220VAC, switch on the circuit for 1 minute after every 5minutes, switch-off, and repeat this operation for 20 times. Put it under the conditions of regular temperature and humidity for 4-5 hours and then check the Rn again
3-5	Curie Temperature	75℃	Check the temperature at 2 times Rn.

VI Application theory Of The Phenolic Resin Overcurrent Protection PTC Thermistor

VII Other Performance Of The Phenolic Resin Overcurrent Protection PTC Thermistor

Number	Items	Technical Requirements	Test Conditions
4-1	Appearance	No noticeable defect, such as, bubbles and micro holes, etc; NO visible damage that may reduce its performance; the symbol is clear	Visual Check
4-2	Welding	It's tinned evenly and with smooth welds, and the tinned area 95%	Do the test according GB2423-28 of Ta, put welding aid on the faze end and soaked it into the 230℃ tin solution with only 5mm distance to the PTC body above the solution, and maintain for 3-5s.
4-3	Heat Resistance	Check the variation rate of resistance before and after the test ΔR/Rn≤20%	Do the test according to GB2423-28 of Tb stsy under the regular temperature and humidity for 4-5 hours, and then check the Rn again.Dipping terminals to a depth of 15mm in a soldering bath of 255℃±10℃,and to the place of 6mm far from PTC boby for 3±0.5s
4-4	Intensity of terminal	Check the variation rate of resistance before and after the test ΔR/Rn≤20% No Visual Damage No break out	Do the test according to GB2423-29 of U Test Ua: Fasten the body and apply a force gradually to each lead until 10N and then keep for 10sec.hold the body and apply a force to each lead until 90° slowly at 5N in the direction of lead axis and then keey for 10sec,and do this in the opposite direction repeat for other terminal.

VIII CHARACTERISTICS Of The Phenolic Resin Overcurrent Protection PTC Thermistor

VIIII 24/30/32V Series Specification

Item	MAX. VOLTAGE(V)	CURRENT WHEN DON’T OPRATE AT 60℃(mA)	poses current when at -10 ℃ (mA)	maximum current(A)	Resistance when 25 ℃ (ohm)	Curie point (℃)	Ontology diameter (Dmax)(mm)	thickness (Tmax)(mm)	lead spacing (W)(mm)	Terminal diameter (phi d)(mm)
MZ8B08D80C100RN24V	24	80	320	2.0	10 ±30%	80	8.0	4.0	5.0	0.6
MZ8B08D80C6R8M24V	24	90	370	2.0	6.8 ±30%	80	8.0	4.0	5.0	0.6
MZ8B10D80C4R7N24V	24	120	500	2.0	4.7 ±30%	80	10.0	4.0	5.0	0.6
MZ8B10D80C3R3N24V	24	140	580	2.0	3.3 ±30%	80	10.0	4.0	5.0	0.6
MZ8B10D80C2R2N24V	24	180	710	2.0	2.2 ±30%	80	10.0	4.0	5.0	0.6
MZ6B06D120C13RN30V	30	145	400	0.7	13 ±25%	120	6.0	4.0	5.0	0.6
MZ8B08D120C4R6N30V	30	250	700	2.0	4.6 ±25%	120	8.0	4.0	5.0	0.6
MZ8B10D120C1R8N30V	30	410	1120	3.0	1.8 ±25%	120	10.0	4.0	5.0	0.6
MZ8B12D120C1R2N30V	30	520	1420	4.3	1.2 ±25%	120	12.0	4.0	5.0	0.6
MZ8B08D80C47RN32V	32	30	140	1.5	47 ±30%	80	8.0	4.0	5.0	0.6
MZ8B08D80C33RN32V	32	40	170	1.5	33 ±30%	80	8.0	4.0	5.0	0.6
MZ8B08D80C22RN32V	32	45	200	1.5	22 ±30%	80	8.0	4.0	5.0	0.6
MZ8B08D80C15RN32V	32	60	240	1.5	15 ±30%	80	8.0	4.0	5.0	0.6

Hot Tags: 200mA 600OHM Positive Temperature Coefficient Resistor MZ4 PTC Thermal Protection, China, Manufacturers, Suppliers, Factory, Made in China, Wholesale, Buy, Customized, in stock, Bulk, Free Sample, Cheap, Discount, Buy discount, Low price, Price, Price list, Quotation